RY-125T-B Automatic Hydraulic Cutting Machine

                          RY-125T-B 全自動液壓裁剪機

Structural characteristics:結構特點

?Computer control system, touch-screen and simple operation, fast and accurate.

電腦控制系統，觸屏式顯示屏，操作簡單、快捷、準確。

?Hydraulic control system absorbs domestic and foreign advanced technology using energy saving low noise devices.

油壓控制系統吸收國內外先進技術，采用節能、省電、低噪音裝置。

?Triple fuel tanks, four posts with precise self-balancing to ensure the consistance of each cutting depth.雙油缸、精密四柱自動平衡連杠機構、能保證每個裁斷位置深度一致。

?Manual hydraulic cutting operation, press the button once to finish one cycle without any disadvantage of imtermittent cutting many time.

油壓裁斷采用雙手動作方式，按扭一次，無連續多次裁斷的弊端，設有緊急停止裝置，確保操作安全。

?Differential cutting design, die quickly descends, when it moves closing to cut mould then changes to automatic slow cutting, which can eliminate the error between upper and lower layer.  

差動設計，快速下降到刀模自動慢切，使工件上層與下層沒尺寸誤差。

?Eco-friendly materials such as PET, PP, OPS, EPE, ABS will not have rough edges or uncutting edges. It can avoid some waste powder sticking on the food boxes.

在裁環保材料PET、OPS、EPE、ABS時不會有裁不斷或邊緣毛邊。食品盒裁斷時可杜絕裁板粉末粘在盒上的現象。

?Cooling system and rotary encoder device make the positioning of knife mold more accurate and stable.

特設有冷卻系統和旋轉編碼器裝置，使刀模定位工作更加準確、穩定。

?Cutting power and cutting depth controlled by micromatic setting which can randomly switch to the best cutting pressure and depth quickly. Because of the precision of the balance of cutting, it can greatly reduce the wear and tear of the knife mold and the board.

裁斷力、裁斷深度設有微調裝置，可快速隨意獲得*之沖裁壓力及深度，因裁斷平衡度精確，可以極大減少刀模及裁板的損耗。

?Self-lubricating system can ensure the precision of the machine and improve the machine durability.

自動潤滑確保機器精密及提高機器耐用度。

?Operator can set unilateral or bilateral automatic continuous mode, improving machine efficient from two to three times in production. 

可配合單邊或雙邊自動控制送料裝置，令整機生產效率提高兩到三倍。